MARKOVCI DAM, SPILLWAY 5 AND 6, SLOVENIA
Markovci, Slovenia, 2022
Refurbishment and installation of new hydraulic drives for operating gates of spillway 5 and 6 on Markovci dam.
Markovci, Slovenia, 2022
Refurbishment and installation of new hydraulic drives for operating gates of spillway 5 and 6 on Markovci dam.
Bosnia and Hercegovina, 2022
Refurbishment of main regulation gate on bottom outlet on HE Rama dam.
Laghouat, Algeria, 2021
Seklafa Dam is a rolled concrete dam located in the in the province Laghouat in the southern Algeria. With its maximum height of 47m, it creates a retention lake of 35 million m3 at a nominal water level of 1012 m above sea level. Maximal flow rate is up to 140 m3/s.
Markovci, Slovenia, 2020
Design, delivery and installation of hydromechanical equipment for SHPP Rogoznica.
Paper factory, Slovenia, 2020
Within one of the major paper factories in Slovenia, a combined heat and power plant has been finalised in autumn 2020
Omiš, Croatia, 2020
Installation of hydraulic power unit, cylinders and piping for driving of gates in water chamber 2
Mellegue, Algiers, 2018
Ouldjet Mellegue Dam is a bulk gravity dam located in the eponymous valley in the Djebel Krorza Mountains in Algiers. With its maximum height of 51.5 m, it creates a retention lake of 155 million m3 at a nominal water level of 575.50 m above sea level. Maximal flow rate is up to 178 m3/s.
Brežice, Slovenia, 2017
HPP Brežice is the fifth hydroelectric power plant in the chain of six HPPs on the lower Sava with a nominal capacity of 47.4 MW. It is of the flow-accumulation type with three vertical aggregates installed with a nominal flow of 500 m3/s, five flow fields and an average annual production of 161 GWh.
Trimo Trebnje, Slovenia, 2007
The thin metal sheets Trimo Trebnje is using for their production are supplied in form of coils up to 1.500 mm in diameter and up to 10 t of weight.
Hemofarm, Obninsk, Russia, 2007
Company Hemofarm has build a new hig-bay warehouse in Obninsk near Moscow, RF for storing raw materials and end products. Gorenje INDOPS and Iskra Impuls have designed technologic equipment for material transfer to / from and within the warehouse.
Trimo Trebnje, Slovenia, 2005
A special system of shuttle cars, conveyors and storage retrieval machines has been developed to move transport units with dimensions 14.000 × 1.400 × 1.400 mm and weight 5.500 kg.
Daimler Chrylser, Berlin, Germany, 2004
In close co-operatoin with Gremany company Heckert&Smidth we have provided an overhead bridge crane manipulator for transferring car bodies for the Daimler Chrysler model Vario.